Sta-Lok Wedge for Dyform & Compact

Sta-Lok Compact Strand Wedges

Replacement Cones

Also known as wedges

For Sta-Lok swageless terminals

For Compact Strand wire

For some sizes of Dyform as well see chart below

Laser marked for identification

Sold Individually

£ 4.70 inc VAT

Calculate Delivery Cost

Sta-Lok Compact Strand Self-fit Wedges, for use with Sta-Lok DIY swageless terminals and Compact Strand wire, can be fitted in situ, onsite or onboard with simple hand tools.

Absolutely essential whenever Sta-Lok terminals are being re-used.

These cones are specifically designed for use with Compacted Strand wire, but only certain diameters of Dyform wire.

Do not use on standard 1x19, 7x7, 7x19

Dyform branded wire is a legacy brand that is no longer available. Modern wire of similar construction is called Compact strand.

4mm, 5mm, 8mm and 10mm wedges are suitable for both Dyform and Compact Strand. If you are ordering for 6mm and 7mm wire please check the chart below to see which parts you require.

Compacted strand and Dyform wire ropes provide higher breaking loads and lower stretch than conventional 1 x 19 wire

There are 5 different constructions (1×7), (1×19), (1×25), (1×31) and (1×36)

Sta-Lok Swageless Self-Fit terminals will terminate each of these constructions using different wedges - see table below.

Sta-LokWire DiameterConstructionCompactDyform
154-044mm1x7YesYes
154-055mm1x19YesYes
154-066mm1x19NoYes
154-06C6mm1x19YesNo
154-077mm1x19NoYes
154-07C7mm1x19YesNo
154-088mm1x19YesYes
154-1010mm1x19YesYes
154-1212mm1x19NoYes
154-12C1912mm1x19YesNo
Dyform Wedges

You may also like