Manual operation chain brake
316 Stainless Steel
Take the strain off your windlass
Install inline between bow roller and windlass
Select by chain size: 8mm, 10mm, 12mm
Lewmar Chain Stoppers are precision-cast from marine grade 316 stainless steel.
Lewmar engineering excellence guarantees a smooth but robust operation and a safe working load in excess of the relevant size chain.
A windlass is not manufactured to take the full weight of a yacht or boat at anchor.
The clutch, the gypsy and all the remaining components, e.g. cogs, and bearings, are designed for the purpose of lowering and retrieving your anchor.
When at anchor, the rode should be secured to a suitable strong point on deck.
This can be achieved by making the chain or the warp off on a cleat, by attaching a snubbing line and slackening the main rode, or simply by the installation of a chain stopper.
Chain stoppers should be securely through-fastened to the deck on a direct line between the windlass and the bow roller.
- Chain Size - 10mm
- Chain Size - 12mm
- Chain Size - 8mm
- Accessory - Chain Stopper