Currency: GBP

Subtotal £0.00
Shipping £0.00
VAT included in total (£0.00)
Total £0.00
Checkout
Menu
  • On sale!
  • -30%
8mm DIN766 MF DAMS Grade 70 Calibrated Anchor Chain



8mm DIN766 MF DAMS Grade 70 Calibrated Anchor Chain
8mm DIN766 MF DAMS Grade 70 Calibrated Anchor Chain - close-up
8mm DIN766 MF DAMS Grade 70 Calibrated Anchor Chain

High Strength Galvanised Anchor Chain

Manufactured by MF Catenificio in Italy from Grade 70kg/mm 2Steel

DIN766 8x24 Calibration

Break Load: approximately 7000kg

Limited Offer on 50-metre or 60-metre lengths in stock

Enhanced Solid Zinc Hot Dip Galvanising

80-metre and 100-metre lengths with an amended specification will be available in December 

£950.00 -30%

£665.00

Pay later with PayPal Credit
More Information
Features
Accessories
Downloads

Jimmy Green Marine 8mm DIN766 MF DAMS Grade 70 is sourced exclusively and directly from MF Catenificio Frigerio, a modern chain manufacturing plant in Italy.

MF Catenificio manufacturing is all carried out in their research, test, and ISO9001-attested production facility.
The whole state-of-the-art enterprise is located in Olginate, near Lecco, Lake Como, Italy.

Every link is proof tested during production as part of their quality control.
The proof load testing process ensures that each weld has been completed successfully.

DAMS stands for Downsizing Anchoring and Mooring System

MF DAMS Grade 70 Calibrated Anchor Chain

MF Calibrated Anchor Chain features enhanced Solid Zinc Galvanising treatment with greater micron depth and prolonged protection against corrosion.

MF Solid Zinc Galvanising

MF has developed an enhanced Solid Zinc Galvanising treatment in conjunction with the standard hot dip galvanising process.
Solid Zinc Galvanising is an MF duplex treatment where both aspects of the process are complementary hot dip molten zinc galvanisation.
The improved coverage, micron depth and adhesion properties extended the effective working life of the galvanising by up to 25%.
Solid Zinc galvanising has a bright smooth appearance.

MF DAMS Grade 70kg/mm squared Calibrated Anchor Chain

MF DAMS Grade 70 8mm DIN766 has a break load similar to 10mm Grade 40 chain.
An 8mm Grade 70 anchor rode can therefore be approximately 50% longer than the 10mm Grade 40 equivalent without any increase in weight.
MF DAMS 8mm DIN766 is a long-length, high-performance extended-cruising solution for yachts up to 12 metres in length overall.
N.B. As a comparison, a 10mm Grade 40 chain is generally suitable for yachts up to 16 metres in length overall.
It is advisable to consider all the relevant information when determining whether 8mm Grade 70 will be suitable for yachts between 12 metres and 16 metres.

Factor in:

  • Displacement: Length ratio
  • Your cruising intentions
  • The anticipated anchorage conditions, e.g. depth, seabed holding characteristics, the length of fetch and degree of exposure to prevailing winds
  • The length of the chain that will be deployed and any extra scope provided by an anchor warp
  • The weight and design of the anchor

Your anchor rode is only as strong as the weakest link, so make sure that all your connectors and shackles are rated to the necessary break load.
The strength of 8mm Grade 70 means it is best considered an all-chain solution rather than a chain/rope combination.
14mm is the most compatible diameter rope to splice into an 8mm DIN766 chain.
16mm diameter rope can be spliced into an 8mm DIN766 chain but is a tight squeeze.
A minimum 18mm diameter nylon rope would be required for the chain and rope combination to be reasonably compatible in terms of strength.

Check your calibration:

There is one main calibration for 8mm chain - DIN766

N.B. Some Windlass and Chain manufacturers also refer to 8mm ISO 4565, but the dimensions are exactly the same as DIN766.
However, it is still very important to check the size and calibration of your gypsy/chain before you order.
If you are unsure, we can help you to decide - we will take all reasonable steps to ensure that you order the correct chain.
The simplest way to check that you are buying the correct calibration is to measure your existing chain, providing that it fits correctly.

We measure ten links because, in practice, it is difficult to measure one link accurately enough.
The links should be laid out flat and pulled tight.
Measure from the outside edge to the outside edge.

How to determine the correct calibration
N.B. The measurement for an old chain may be a little longer than new due to a degree of wear and elongation in use.

MF 8mm DIN766 Calibrated Chain Dimensions

MF DAMS Grade 70 8mm DIN766 Dimensions:
Chain Size Inside Width Outside Width Pitch
8mm 10.5mm 26mm-27mm 24mm

Outside Width - depends on the degree of weld protrusion

MF DAMS Grade 70 8mm DIN766 Specification:
Maximum Pin Dia. Break Load   Weight per metre
10mm 70Kn c 1.4kg

Every link is tested to the proof load during the manufacturing process, ensuring that each weld has been completed successfully

1Kn Force = 101.972Kg Break Load

70Kn = approximately 7138kg

Maximum Pin Diameter refers to the largest pin which will fit comfortably in the end link of an 8mm DIN766 chain.

Select the largest possible galvanised shackle (or anchor connector) by pin diameter to fit the chain.

A copy of the appropriate Test Certificate for your batch is available with your order on request - this is an extract from a recent certificate:

MF DAMS 8mm DIN766 Grae 7- calibrated anchor chain certificate

Jimmy Green Quality Control and Accountability
Every length of chain is checked and labelled with the manufacturer, the date received, and a corresponding batch number when it arrives.
The batch number is then recorded at the point of sale.
Every chain order is, therefore, traceable and accountable to the Manufacturer Test Certificate.

  • Purchase Type - Set Lengths
  • Chain Size - 8mm
  • Chain Finish - Hot Dipped Galvanised
  • Boat Length (Anchoring) - 10-12 metres up to 9 tonnes
  • Boat Length (Anchoring) - 12-14 metres up to 13 tonnes
  • Boat Length (Anchoring) - 14-16 metres up to 16 tonnes

Chain Markers

Chain Markers

£5.00
Quick Link
Chain Rivet Link - stainless steel
Maillon Rapide, stainless steel rated link

Osculati Chain Connecting Rivet Link, 8 pins
Force 7 Grade 70 anchor chain shackle link, showing all three sizes

AnchoRight 8mm Chain Markers - Some Colours

MF DAMS 8mm DIN766 Certificate

MF 8mm DIN766 Grade 70 Solid Zinc Sample Test Certificate

Download (210.94KB)