Clearance LIROS Racer Dyneema

The Jimmy Green Rigging Team optimise the use of as many reel ends as they can in servicing our custom build orders, but inevitably there are always some left on the shelf.
These are available at a reduced rate per metre.

Please note that if you are trying to add a pair to your basket, but the website is not responding, it means that there is only one length available.

The Jimmy Green Rigging Team can add a splice to either end if required. The individual finish is available to purchase online:

THE JIMMY GREEN RIGGING TEAM PROFESSIONAL FINISH

Liros Racer Dyneema (article 02001) is designed for Regatta Racing Performance, a superb hard wearing, very low stretch, high load capacity line engineered for competitive racing in exacting conditions

Liros Racer Dyneema (article 02001): Construction, Facts, Features and Plus Factors

Cover: specially engineered 32plait (6mm, 8mm 24plait) spin-dyed high tenacity polyester
Core: Braided Dyneema SK78 core, LIROS-Heat-Stretch-System, LIROS Coating System with a very thin extra traction layer

• Very low stretch < 1.5% at working load
• High load capacity
• Excellent smooth handling
• Non kinking, balanced braiding
• Excellent holding power in cleats and clutches
• Good Grip around winches
• Solid shape retention around winches - firm, compact braid construction doesn't flatten
• Runs freely through blocks and sheaves
• Spliceable - advanced core dependent splice
• LIROS-Heat-Stretch-System
• LIROS Coating System

LIROS-Heat-Stretch-System - unique LIROS pre-stretching process, calibrated under exacting temperature and tension conditions, designed to minimise stretch and enhance performance.

LIROS Coating System - polyurethane impregnation process improves resistance to abrasion and protects against UV damage by up to 50%.

N.B. LIROS Racer has an inner traction layer which is not load-bearing and a certain amount is removed as part of the core-dependent splice.

The LIROS manufacturing process produces a balanced braid on braid construction with consistency second to none.

LIROS Manufacturing: meticulous attention to exacting standards ~ decades of experience ~ modern factory with state of the art, computer programmed twisting and braiding machinery

The LIROS Racer polyester cover can be permanently removed to produce a cover stripped Dyneema core only loop splice.

Snapshackles can then be retrofitted/changed over, attached using a simple a cow hitch - pass the loop through the eye of the shackle, over the top and back down to the rope end

Liros Racer Dyneema (article 02001) Specifications: Break Load, Maximum Sail Area and Working Load Stretch

LBL = LIROS Break Load
MAX SA = LIROS maximum recommended Sail Area in square metres
WLS = LIROS stretch at working load
< = less than

Please note that extra stock cannot be supplied at the same reduced price.