Clearance Inshore Danbuoy

This Inshore Danbuoy has an imperfectly casted weight, see image above.

The Jimmy Green 1 piece Inshore Danbuoy is produced in house from an 8mm diameter solid GRP rod, cylindrical encapsulated float, plastic-dipped lead weight and lightweight high visibility flag.

Jimmy Green 1 Piece Inshore Danbuoy Facts and Features:

Please note that a light cannot be fitted

Robust 8mm diameter GRP rod

Plastic end stop on bottom of rod to protect the deck

Modular float for easy repair and replacement in the event of UV degradation

Overall length 2.14 metres

High visibility orange flag, made from lightweight ripstop nylon, approximately 1.6 metres above sea level

Retro-reflective tape on the rod above and below the flag

3 metres of LIROS 16 plait Hollowbraid multifilament polypropylene floating line for attaching to e.g a horseshoe lifebuoy

There is a delivery surcharge applied by the couriers on this danbuoy because the overall length of the parcel is over 1 metre.

A danbuoy is normally the first item deployed in the event of a man overboard incident.

Therefore it should be mounted/located ready for quick deployment.

We sell Danbuoy Accessories for

1. preventing the flag from being blown out
2. protecting the float against UV degradation
3. locating the danbuoy to e.g. stanchion, pushpit

1 piece Inshore Danbuoy Diagram and Dimensions

If you need any more help with selecting a new danbuoy, installing your danbuoy or refurbishing your existing danbuoy then please contact us on 01297 20744

Danbuoy Refurbishment Kits