Petersen Swageless Compression Terminal - In-Line Link

In-Line Link Terminal

for joining 2 wires of the same diameter

DIY swageless hand tool operation

Superior HI-Mod Compression design

Standard 1x19 wire only

Check the chart for dimensions

£ 44.73 inc VAT

£ 49.70

-10%

Calculate Delivery Cost
Petersen Swageless Compression Terminal - In-Line Link

Petersen Hi-Mod terminals are designed for easy assembly by using an exclusive ‘twist-click’ system.

This method is extremely beneficial on large diameter or Compact Strand wire where the strands are stiff and difficult to bend.

Hi-Mod twist and click assembly:

  • Hold the end fitting against the crown ring
  • Twist the body in the same direction as the lay of the wire while applying upward pressure.
  • The outer wire strands will click into position on the crown
  • If necessary, use a small screwdriver to reposition any strands that have inadvertently crossed

Petersen have producd a very informative video illustrating the twist and click method and how to fit their Hi-Mod terminals to wire successfully:

HI MOD INSTRUCTIONAL VIDEO



Petersen in link link compression terminal


WireWDA/FLA/FBODWeight
3mm26mm6mm9.5mm11mm10g
4mm27mm8mm11mm13mm14g
5mm33mm9mm14mm16mm24g
6mm35mm11mm17mm19mm43g
7mm43mm13mm20mm22mm63g
8mm55mm16mm22mm26mm115g
10mm62mm17mm26mm30mm180g
12mm72mm22mm32mm38mm350g
14mm85mm24mm36mm45mm518g



You may also like