3 Links of G4 Stainless Steel Chain

Three links of G4 Stainless Steel Anchor Chain cut from Jimmy Green stock sourced from William Hackett in the UK.

The three links connect the anchor end of the swivel to the shackle on the anchor.
The smaller end of the swivel connector is connected to the anchor chain.

This system is most commonly used with the Kong Swivel Anchor Connector

For KGAC08-S:   6-8mm connector (BRS-77.318.106) - use 3 links of 10mm chain
For KGAC10-S: 8-12mm connector (BRS-77.318.108) - use 3 links of 10mm chain

Jimmy Green Three Links Advisory**

The links for the Kong KGAC10-S, 8-12mm anchor connector must be 10mm ISO4565.

10mm DIN766 has slightly smaller internal dimensions and will not fit on the anchor connector pin.

The Jimmy Green Picking Team will ensure you get the correct 10mm Chain Size.

The picture below shows the correct configuration with one bow shackle and three links of the connecting chain (galvanised in the photo):

If the hole/cut-out in the anchor shank has sharp edges and will not accept the crown of the bow shackle in a proper load-bearing manner, it may be pertinent to fit two shackles back to back.
The picture below shows this optional configuration with an extra D shackle:

Anchoring Shackles