- -3%
More Information
Features
Accessories
The Lewmar Pro-Series range of windlasses are DIY-ready, easy to install and housed in 100% 316 stainless steel.
The durable deck unit with closed cell neoprene gasket keeps the internal parts well protected.
The push-button control and built-in manual emergency recovery system means that anchoring has never been easier.
Features
- All stainless steel design
- Powerful motor providing fast line speed
- Re-designed super-efficient control arm with increased spring tension and modified profile
- Unique Pro-Guard feature prevents rope jumps and snags
- Manual emergency recovery equipped - all you need is a common 1/2 socket wrench
- Maximum pulling power: Pro-700 = 320kg, Pro-1000 = 454kg
- Convenient above-deck installation
- 5-year warranty
- For sail and powerboats up to 36 feet (1000W)
- Automatic Free Fall conversion kits are available
Included in the box:
- Windlass
- Base gasket seal
- Fast-mounting studs
- Installation wrench
- Circuit breaker
- Dual-direction solenoid (control box)
- Rocker switch
N.B. a solenoid may also be referred to as a relay, contactor or control box
Windlass Part Number | Model | Gypsy Number | Gypsy Calibration | Recommended Rope |
---|---|---|---|---|
6656011967-310 | Pro-Series 700, 6-7mm (1/4") | 502/503 | 6mm DIN 766, 7mm DIN 766, 1/4" ISO G4, 1/4" BBB | 12mm 3-strand and 8-plait |
6657011967-311 | Pro-Series 1000, 6-7mm (1/4") | 502/503 | 6mm DIN 766, 7mm DIN 766, 1/4" ISO G4, 1/4" BBB | 12mm 3-strand and 8-plait |
6657011198-311 | Pro-Series 1000, 8mm (5/16") | 504 | 8mm DIN 766, 5⁄16" BBB, 8mm ISO 4565 | 14/16mm 3-strand and 16mm 8-plait |
N.B.
12mm rope is strength-comparable and splice-compatible to 7mm Grade 40 DIN766 Calibrated Chain
14mm rope is strength-comparable and splice-compatible to 8mm Grade 40 DIN766 Calibrated Chain
We do splice 16mm diameter anchor rope into 8mm Chain on request but it is a border line tight fit in the link
Lewmar | Chain | Motor Supply | Motor Power | Maximum Pull | Working Load Limit | Maximum Line Speed | Normal Current Draw | Circuit Breaker | Approximate Weight |
---|---|---|---|---|---|---|---|---|---|
Pro-Series 700 | 6-7mm | 12V | 500 Watt | 320kg | 79kg | 32 metres/minute | 35 Amps | 50 Amp | 8.5kg |
Pro-Series 1000 | 8mm | 12V | 700 Watt | 454kg | 114kg | 32 metres/minute | 50 Amps | 70 Amp | 9.5kg |
N.B. Pro-Fish Specifications are the same as the Pro-Series
Height | Length | Width |
---|---|---|
146mm | 245mm | 178mm |
Lewmar Recommended Windlass Maintenance
Regular Servicing
- Wash down the windlass using fresh water.
- Examine all electrical connections for corrosion, clean and lightly grease.
- Check anchor locker drain to avoid water damage to motor/gearbox.
- If anchor locker fills with water, check motor is dry and free of rust.
- Check anchor rode splice for wear.
- Check gypsy as it is a high wear item and will last longer if properly used. When re-assembling the cone and gypsy, add a small smear of grease to the contact surfaces.
- Check mounting studs after first two or three recoveries and regularly thereafter.
Annual Servicing
- Check electric cables for damage. Repair/renew as required.
- Strip the above deck components, clean and lightly grease.
- Check motor/gearbox for corrosion, clean and repaint with a suitable marine grade oil-based enamel paint.
- Remove electric motor cover and blow dust away from brushes using foot pump or similar taking care not to breathe any dust.
- Chain Size - 7mm
- Chain Size - 8mm
- Chain Size - 6mm
- Boat Length (Windlasses) - up to 25 feet
- Boat Length (Windlasses) - up to 30 feet
- Boat Length (Windlasses) - up to 35 feet
- Boat Length (Windlasses) - up to 40 feet
- Boat Length (Windlasses) - up to 20 feet
- Horizontal or Vertical - Horizontal