Lewmar V4 Vertical Windlass

The Lewmar V for vertical windlass range has been designed for ultimate performance - designed with stylish aesthetics and manufactured for robust durability - The V4/V5 variations are the largest rope/chain combination windlasses in the Lewmar range

Lewmar V4 Vertical Windlass: Facts, Features and Plus Factors:

• Precison cast 316 stainless steel deck unit
• Combination Rope/Chain Gypsy
• Manual chain release (Free Fall)
• Cone clutch for smooth, easy control
• Optional manual override motor gearbox
• W.A.R.P = Wear and Abrasion Resistant Pattern - on the rope drum
• Fall safe anchor lock - prevents accidental deployment when under way
• Robust/reliable worm drive gearbox
• FastFit™ motor/gearbox alignment ***
• Manual chain release (Free Fall) option

The Lewmar V4 Vertical Windlass is suitable for motor and sailing yachts up to approximately 16 metres length overall.

Consult the Lewmar Windlass Size Guide for more detailed information on selecting the correct model for your yacht.

Approximate Weight: Gypsy only 29kg, with drum 36kg

Lewmar Windlass Rope/Chain Combination Gypsy: Break Load and Splicing Compatibility
16mm rope is a little under strength compared with 10mm Grade 40 Calibrated Anchor Chain.
16mm and 18mm rope are splice-compatible with 10mm DIN766/ISO4565 Grade 40 Calibrated Anchor Chain
We can splice 20mm diameter anchor rope into 10mm Chain for you on request but it is a border line tight fit in the link and the splice will be very bulky compared with the cahin and may not pass around the gypsy successfully.

Lewmar FastFit™ Installation Feature***

Normally, gearbox alignment to the deck unit is a critical part of the installation process, but Lewmar have developed a special hassle-saving clamping system which perfectly aligns the deck unit and motor/gearbox enabling one person to fit them together on their own.

First, fix the deck unit, then slide the gearbox up the shaft, swing the FastFit™ clamp shut and tighten up the bronze nut - the motor/gearbox can be rotated and fixed in increments of 45°.

Lewmar Recommended Windlass Maintenance

Regular Servicing

• Wash down the windlass using fresh water.
• Examine all electrical connections for corrosion, clean and lightly grease.
• Check anchor locker drain to avoid water damage to motor/gearbox.
• If anchor locker fills with water, check motor is dry and free of rust.
• Check anchor rode splice for wear.
• Check gypsy as it is a high wear item and will last longer if properly used. When re-assembling the cone and gypsy, add a small smear of grease to the contact surfaces.
• Check mounting studs after first two or three recoveries and regularly thereafter.

Annual Servicing

• Check electric cables for damage. Repair/renew as required.
• Strip the above deck components, clean and lightly grease.
• Check motor/gearbox for corrosion, clean and repaint with a suitable marine grade oil-based enamel paint.
• Remove electric motor cover and blow dust away from brushes using foot pump or similar taking care not to breathe any dust.

Lewmar V4 Vertical Windlass Dimensions: