Mantus Galvanised Anchor
MAN-MANAMANGV008
Hot dip galvanised
from 8lb (3.6kg) to 175lb (78kg)
Dismantles for convenient stowage
Deep penetrating flukes dig quickly for high holding power
Sizes 8lb, 13lb and 25lb in stock, please allow 5-7 days for larger sizes
17, 105 and 155lb out of stock until Jan 25
More Information
Features
Accessories
Mantus Marine USA anchors are world renowned for their outstanding setting and holding properties
Digs like no other anchor
Mantus Anchors are designed to penetrate dense grassy bottoms and set with unparalleled holding power.
When tested, Mantus Anchors set faster and deeper than any other tested anchor, including Rocna, Manson Supreme, Bulwagga, Fortress, Bruce, CQR and Danforth anchors.
Easy to stow
Mantus Anchors break down for tidy storage, so you can stow one or two as spares without taking up much needed locker space.
Strong Design and Manufacture
Mantus Anchor Features:
- Formed from high quality steel plate
- No cast parts
- Shank and shank boot are welded from both the top and the bottom
- Shank and roll bar are bolted to the fluke
- ASTM certified steel bolts are oversized with a large safety margin
- Although the shank is attached to the fluke with 4 bolts, a single bolt would have sufficient strength to handle the maximum expected load on the anchor
- Every part of the anchor is hot-dipped galvanised for corrosion protection
- The shank is produced from HT/ASTM 514 high quality steel and the flukes are from the mild steel A36 equivalent
- Sharp-headed precision machined nose - formed into the perfect chisel shape to achieve maximum penetrating power
- Small holes (flush with the roll bar) are to vent air in the galvanisation process to promote even coverage
Mantus Marine offer a Lifetime Warranty on all anchor parts and a 3 year warranty on the galvanising.
Mantus Marine Anchor Size Guide
Mantus publish a comprehensive Anchor Sizing Guide based on extensive testing and feedback, see below.
The size chart is based on sustained high winds and poor holding conditions (low viscosity sea bed) for a cruising yacht spending most of her time at anchor
N.B. Comparing surface area can be a good judge for potential holding capability.
Mantus anchor sizing recommendations are presented in the table, divided into three categories:
- Lunch Anchor - recommended for lighter use with expected winds under 30 knots
- Working Anchor - recommended for winds up to 50 knots
- Storm Anchor - recommended for winds above 50 knots
Mantus believe in making their recommendations assuming the worst case scenario.
The result may seem conservative compared with other manufacturers but they believe it is more realistic.
Mantus Anchor Assembly Instructions
| Size | A | B | C | D | E | F |
|---|---|---|---|---|---|---|
| 8lb / 3.6kg | 305 | 386 | 331 | 472 | 166 | 196 |
| 13lb / 5.9kg | 371 | 470 | 403 | 576 | 203 | 239 |
| 17lb / 7.7kg | 410 | 519 | 445 | 636 | 224 | 264 |
| 25lb / 11.4kg | 443 | 562 | 482 | 687 | 242 | 285 |
| 35lb / 15.9kg | 493 | 625 | 536 | 765 | 269 | 318 |
| 45lb / 20.5kg | 554 | 702 | 602 | 859 | 303 | 357 |
| 55lb / 25kg | 592 | 751 | 644 | 919 | 324 | 382 |
| 65lb / 29.5kg | 631 | 800 | 686 | 979 | 345 | 407 |
| 85lb / 38.6kg | 670 | 850 | 729 | 1039 | 366 | 432 |
| 105lb / 47.7kg | 725 | 920 | 789 | 1125 | 396 | 467 |
| 125lb / 56.8kg | 781 | 990 | 849 | 1211 | 427 | 503 |
| 155lb / 70.5kg | 886 | 1123 | 963 | 1374 | 484 | 571 |
| 175lb / 79.5kg | 947 | 1201 | 1030 | 1469 | 517 | 610 |
- Finish - Galvanised
- Anchor Weight kg - 7.7kg
- Anchor Weight kg - 11.4kg
- Anchor Weight kg - 15.9kg
- Anchor Weight kg - 20.5kg
- Anchor Weight kg - 25.0kg
- Anchor Weight kg - 29.5kg
- Anchor Weight kg - 38.6kg
- Anchor Weight kg - 47.7kg
- Anchor Weight kg - 55.0kg
- Anchor Weight kg - 56.8kg
- Anchor Weight kg - 70.0kg
- Anchor Weight kg - 78.0kg
- Anchor Weight kg - 3.6kg
