Manufactured using KOS 4mm 1x19 316 bright polished stainless steel wire, Break Load 1280kg Also available covered in white PVC to 6mm diameter Professional finish by the Jimmy Green Rigging Team Custom Build Instructions
4mm Guardwires, manufactured from KOS 4mm 1x19 construction 316 bright polished stainless steel wire - Break Load 1280kg
Also available covered in white PVC to 6mm finished diameter for extra protection - Break Load 1280kg
Select the finished length required and suitable terminals for each end.
The Jimmy Green Rigging Team will produce your guardwires with care and attention to detail
N.B. It will be assumed any adjustable end-fitting will be set at the 2/3 open position.
All measurements are taken from bearing edge to bearing edge
Please allow a proportional gap of approximately 200mm-300mm (8''-10") if using lanyards at one end
N.B. Pictures of end-fittings are not to scale - They are illustrative only
Custom built 4mm 1x19 stainless steel wire rigging is cut, roller swaged and talurit pressed on site by the Jimmy Green Rigging Team using only top quality materials from premium, industry recognised brands and manufacturers
4mm 1x19 stainless steel wire features: Exclusively sourced from KOS Manufactured using 316 marine grade stainless steel to 1.4401. Min Break Load 1280kg
4mm 1x19 talurit terminations: Stalok British standard copper ferrules Stalok and Hamma thimbles Pressed using a 20 tonne manual talurit press.
4mm 1x19 swage terminations: All 316 stainless steel Premium Brands e.g. Stalok, Navtec, BSI, Bluewave, Hamma and Petersen Swaged using a 3 phase Electrically powered, hydraulic Wireteknik Roller Swager